In this paper, recommended spiral passive micromixer was designed and simulated. spiral design has the potential to create and strengthen the centrifugal force and the secondary flow. A series of simulations were carried out to evaluate the effects of channel width, channel depth, the gap between loops, and flowrate on the micromixer performance. These features impact the contact area of the two fluids and ultimately lead to an increment in the quality of the mixture. In this study, for the flow rate of 25 μl/min and molecular diffusion coefficient of 1×10-10 m2/s, mixing efficiency of more than 90% is achieved after 30 (approximately one-third of the total channel length). Finally, the optimized design fabricated using proposed 3D printing method.

In this study, Teaching-learning-based optimization (TLBO) algorithm is employed for the first time for optimization of real world truss bridges. The objective function considered is the weight of the structure subjected to design constraints including internal stress within bar elements and serviceability (deflection). Two examples demonstrate the effectiveness of TLBO algorithm in optimization of such structures. Various design groups have been considered for each problem and the results are compared. Both tensile and compressive stresses are taken into account. The results show that TLBO has a great intrinsic capability in problems involving nonlinear design criteria.

Application of the network equivalent concept for external system representation for power system transient analysis is well known. However, the challenge to utilize an equivalent network, approximated by a rational function, is to guarantee the passivity of the corresponding model. In this regard, special techniques are required to enforce the passivity of the equivalent model through a post processing approach that minimizes its impact on the original model characteristics. In this paper, the passivity is enforced by expressing the problem in terms of a convex optimization problem that guarantees the global optimal solution. The convex optimization problem is efficiently solved by recently developed numerical interior–point methods. This passivity enforcement is also global which indicates that the passivity enforcement in one region does not lead to passivity violation in other regions.

The present study aims to identify the factors affecting the quality of Teaching-learning time management in multi-grade classes from the perspective of experienced teachers. The research approach was qualitative phenomenographical and the research population included teachers of multi-grade classes in Yasuj (Iran), 24 of whom were selected through purposeful sampling observing theoretical saturation in semistructured interviews. In order to validate the interview questions, the professors of the Department of Educational Sciences were consoled. The interview transcripts were presented to and affirmed by the interviewees to ensure the reliability of the research data. The interview transcripts were coded and categorized, and then analyzed and classified. The experiences of the teachers on factors affecting the improvement of Teaching-learning time management in multi-grade classes were classified into the two major categories of affirmative and privative. The affirmative major category consists of three main categories and nine subcategories, and the privative category consists of five main categories.

Inertial Navigation System (INS) is one of the navigation systems widely used in various land-based, aerial, and marine applications. Among all types of INS, Microelectromechanical System (MEMS)-based INS can be widely utilized, owing to their low cost, lightweight, and small size. However, due to the manufacturing technology, MEMS-based INS suffers from deterministic and stochastic errors, which increase positioning errors over time. In this paper, a new effective noise reduction method is proposed that can provide more accurate outputs of MEMS-based inertial sensors. The intelligent method in this paper is a combined denoising method that combines Wavelet Transform (WT), Permutation Entropy (PE), Support Vector Regression (SVR), and Genetic Algorithm (GA). Firstly, WT is employed to obtain a time-frequency representation of raw data. Secondly, a four-element feature vector is formed. These four features are (1) amplitude of frequency, (2) its ratio to mean of amplitudes of all frequencies, (3) location of frequency in time-frequency representation, and (4) judgment on behaviors of frequency that is obtained by utilizing PE. Thirdly, based on the feature vector, the GA-SVR algorithm predicts amplitudes of all frequencies in the time-frequency representation of the denoised signal. Finally, by employing inverse WT the denoised signal is obtained. In this work, the outputs of the Inertial Measurement Unit (IMU) in ADIS16407 sensor, as a low-cost and MEMS-based INS, have been utilized for data collection. The proposed method has been compared with other noise reduction methods and the achieved results verify superior improvement than other methods.

Multi-label classification aims at assigning more than one label to each instance. Many real-world multi-label classification tasks are high dimensional, leading to reduced performance of traditional classifiers. Feature selection is a common approach to tackle this issue by choosing prominent features. Multi-label feature selection is an NP-hard approach, and so far, some swarm intelligence-based strategies and have been proposed to find a near optimal solution within a reasonable time. In this paper, a hybrid intelligence algorithm based on the binary algorithm of particle swarm optimization and a novel local search strategy has been proposed to select a set of prominent features. To this aim, features are divided into two categories based on the extension rate and the relationship between the output and the local search strategy to increase the convergence speed. The first group features have more similarity to class and less similarity to other features, and the second is redundant and less relevant features. Accordingly, a local operator is added to the particle swarm optimization algorithm to reduce redundant features and keep relevant ones among each solution. The aim of this operator leads to enhance the convergence speed of the proposed algorithm compared to other algorithms presented in this field. Evaluation of the proposed solution and the proposed statistical test shows that the proposed approach improves different classification criteria of multi-label classification and outperforms other methods in most cases. Also in cases where achieving higher accuracy is more important than time, it is more appropriate to use this method.

A High-gain, fully balanced preamplifier is presented. The proposed structure advantages flipped voltage follower scheme to achieve a compact current conveyor with very low input impedance. The presented current conveyor then is used as a core element to realize a high-gain, gm-enhanced trans-conductance amplifier. The presented amplifier is suitable for application as a preamplifier. The high gain of amplifier makes it very suitable to be configured in a feedback form to deliver a high-precision predefined or programmable amplification gain. The proposed structure draws a very low power of 150nW from a 0.6V supply voltage. The Spectre Post-layout simulations with TSMC 180nm CMOS technology have been performed. The proposed amplifier exhibits an open-loop DC gain of 141.5dB and 3-dB frequency bandwidth of 2.4kHz at 60dB closed-loop configuration. The load capacitance is set to be 5pF. The proposed structure also delivers high CMRR and PSRR values of 148.3dB and 153.7dB, respectively.